The Sal Range of Electric Stair Climber Trolleys can lift either 110kg, 140kg or 170kg (depending on the model listed below) and can climb stairs at a rate of 35 to 48 steps per minutes. The SAL is primarily a handy modular-designed hand truck with an unladen weight of only 16kg.
Once you fit the snap-on battery, this simple hand truck becomes a versatile all-rounder: a normal hand truck for general use on level ground and a powered stair climber for use on steps and stairs. Additional features, such as the wide pneumatic or puncture proof tyres make this the equal of any conventional hand truck for use outdoors in route deliveries with the added bonus of also going up steps and stairs. With the SAL Series climbing stairs has been reduced to the minimum: the SAL pulls itself up onto the step above and lifts to only the necessary step height.
During descent, the motor acts as an electric brake and the load is brought down smoothly. It is also ideal for winding staircases and across tight landings. The SAL has a mechanical clutch which will prevent damage if the unit is used to descend the stairs with the controls in the ascent position. The unit also features electronic overload protection preventing ascent with too heavy a load. The SAL has two ascending speed settings (slow and fast - with a speed of up to 48 stairs per minute), plus a wide variety of model options, lifting capacities and additional accessories
SAL only lifts the actual step height because the support wheels use the higher step to climb. The advantage: less effort and makes fast climbing possible (up to 48 steps per minute).
The electronic power supply has a 2-speed control for ascending. During descent the intelligent power supply features step sensing and starts automatically. In fact you simply let the SAL's roll down the tread without touching any switch. The power supply acts as a brake and controls the descending movement. The operator only has to concentrate on the load.
SPECIFICATIONS
SAL 110 SAL 140 SAL 170
Uni/Ergo Fold Fold-L Uni/Ergo Fold Fold-L Uni/Ergo Fold Fold-L
Capacity (kg) 110 140 170
Maximum climbing speed (steps/min) 48 35 29
Maximum step height (mm) 210 210 210
Overall height - extended (mm) 1530/1570 1450 1630 1530/1570 1450 1630 1530/1570 1450 1630
Overall height - folded (mm) - 1000 1305 - 1000 1305 - 1000 1305
Overall width (mm) 480 480 480
Overall depth (hinged) (mm) 280 280 280
Standard toe depth (mm) 236 236 236
Weight - excluding snap on battery (kg) 16 16 16
Weight - including snap on battery (kg) 20 20 20
Battery Capacity - full load (app) (steps) 260 260 220
Battery Capacity - half load (app) (steps) 350 300 300
Hercules Lite - Sal Range
Electric Stairclimbing Trolley
The Sal Range of Electric Stair Climber Trolleys can lift either 110kg, 140kg or 170kg (depending on the model listed below) and can climb stairs at a rate of 35 to 48 steps per minutes. The SAL is primarily a handy modular-designed hand truck with an unladen weight of only 16kg.
Once you fit the snap-on battery, this simple hand truck becomes a versatile all-rounder: a normal hand truck for general use on level ground and a powered stair climber for use on steps and stairs. Additional features, such as the wide pneumatic or puncture proof tyres make this the equal of any conventional hand truck for use outdoors in route deliveries with the added bonus of also going up steps and stairs. With the SAL Series climbing stairs has been reduced to the minimum: the SAL pulls itself up onto the step above and lifts to only the necessary step height.
During descent, the motor acts as an electric brake and the load is brought down smoothly. It is also ideal for winding staircases and across tight landings. The SAL has a mechanical clutch which will prevent damage if the unit is used to descend the stairs with the controls in the ascent position. The unit also features electronic overload protection preventing ascent with too heavy a load. The SAL has two ascending speed settings (slow and fast - with a speed of up to 48 stairs per minute), plus a wide variety of model options, lifting capacities and additional accessories
SAL only lifts the actual step height because the support wheels use the higher step to climb. The advantage: less effort and makes fast climbing possible (up to 48 steps per minute).
The electronic power supply has a 2-speed control for ascending. During descent the intelligent power supply features step sensing and starts automatically. In fact you simply let the SAL's roll down the tread without touching any switch. The power supply acts as a brake and controls the descending movement. The operator only has to concentrate on the load.
Features
110kg, 140kg and 170kg lift capacity.
Extremely light: weighs 16 kg plus 4 kg for the snap on
battery.
Made of modular aluminium construction.
Very fast: up to 48 steps/minute.
2 speed operation: high/low.
Intelligent power pack features step sensing and starts
automatically (descend mode).
With sliding clutch and electronic overload
protection.
Pneumatic tyres - diameter 260mm x 85mm.
3 models available - upright and foldable.
9 optional toe plates sizes to suit many loads.
Optional foldable frame
Toeplate hinged – fixed as an option
Hercules Sal 330 HD
Hercules Sal 330 HD - Stairclimbing Trolley
Hercules Complete Lifting Solutions further expands its range of modular built electric powered stairclimbing trolley for loads of up to 330kg.
A ridge frame work made of patented aluminium profiles, specially designed wheels with a unique braking system (will protected situated inside the rims of the main wheels) and a further optimised climbing systems, makes this machine extremely user friendly. The main wheels are equipped with especially adapted puncture proof tyres for sate operating on the stairs.
Features 330kg lift capacity
Available with foldable handle for fixed.Rigid frame construction made from patented aluminium extrusion
with 3 box sections for additional strength.
Main wheels of modern design with aluminium rims equipped with
specially designed, puncture proof tyres.
Fixed aluminium toeplate (size - width 530mm x length 183mm).
Soft coated long wings for safe carriage of broad loads.
Optimised climbing mechanism for balanced lifting of loads.
Reduced machine weight.
Two speed operation.
Two drive modes (single step and continuous mode).
Advanced breaking system.
Optional toeplate extension with swivel castors that attached to
the toeplate. Optional dolly wheel attachment (for the fixed handle only).Up/down button on left and right side of handle. Intelligent electronics, for safe operation in all transport situations.
Advanced braking system situated inside the rims of the main
wheels. Brakes can be switched off during manoeuvring on flat areas. Puncture proof tyres with excellent running characteristics also on
uneven and rough floors.
Lite - MTK Range
The Lite MTK Range of Electric Stairclimbing Trolley can lift either 190kg or 310kgs (depending on the model listed below) and can climb stairs at a rate of 16 to 18 steps per minutes for the MTK 190 and 8 to 9 steps per minutes for MTK 310B.
The heart of the hand truck is the electric lifting system with a crank drive. It is controlled by the electronic power switch, actuated by push buttons located on the right handles.
By releasing the push button the load can be put down in every position.
A sliding clutch protects the handtruck from mechanical overload. Double handles and a foldable frame enables the load to be under optimal control in every position.
A quick-change battery unit is included. In order to guarantee long-term use, the battery can be recharged quickly by a special quick battery charger for use in trucks and vans.
Features
190kg to 310kg lift capacity.
Pneumatic tyres - diameter 260mm x 85mm.
Double handholds.
Foldable frame.
Quick charge battery charger for use in trucks.
Options:
Automatic brake for MTK 190
Accessories:
Toeplate attachment with 2 swivel castors 400mm or 500mm In-transit charger
SPECIFICATIONS MTK 190 MTK 310B
Capacity(kg) 190, 310
Maximum motor power (watt) 450
Climbing speed (steps/min) 16 - 18
8 - 9
Battery capacity approx (steps) 170 60
Weight - including battery (kg) 37.5
40.5 Weight of battery unit (kg) 5.5 5.5 Max. Step height (mm) 210 210. Overall height (mm) 1520 1620
Overall height folded (mm) 1100 1100
Main wheels (pneumatic) (diameter) 260 x 85
260 x 85.
Width of frame (mm) 380
Clearance (width) (mm) 510
590
Overall width (without toeplate) (mm) 510 x 300 580 x 300
Depth of toeplate (mm) 195 195
Stair Robot - SR 450
Stair Robot - SR 450
The StairRobot SR450 is a powerful yet easy to handle item of moving equipment.
The SR450 is a battery-powered stair-climbing device styled for the full-time professional or distribution operator. Twin rubber tracks spread the load comfortably over three treads of a stairway as the SR 450 moves up or down stairs.
The SR 450 is equipped with a folding swivel wheel for short turning in narrow spaces and easy handling to and from a staircase.
Items up to 1880 mm can be handled by use of the extendable frame structure. For longer items we developed a special version with remote control.
Drive:
Driving power is provided by a minimal noise 24 V permanent magnet motor and is transmitted directly to the drive-axle by a built-on worm-gearbox. The PM-motor creates an effective break when the control switch is released or the power supply is interrupted for any reason.
Batteries:
4 batteries are fitted in series to provide a 24 volt output. A integrated led battery indicator on the control display makes it possible to monitor the batteries.
Charging:
The SR 450 comes with a 220V 0r 110V / 24 charger (3 amh), charging time with batteries fully discharged 3,5 hours. When the batteries are fully charged the charger will automatically turn into a trickle mode. For charging the SR 450 on a van or truck an optional 4 amp 24V booster/charger is available which makes it possible to charge the SR 450 between jobs.
Dolly:
A heavy duty dolly is available for handling long and bulky objects. The dolly is used to transport the (loaded) SR 450 to and on the stairs and is used at the landing.
The dolly is constructed of square steel fittings with four heavy-duty swivel wheels for easy movements. An extendable frame can be pulled out to increase stability while driving the SR 450 on the dolly. The lead-off ramp is used to connect the dolly with the stairway.
SPECIFICATIONS
Maximum capacity (kg) 350
Speed (mtr/min) 4
Maximum angle (deg) 45
Length (mm) 1450
Width (mm) 460
Height (mm) 220
Load length standard (mm) 1220
Load length handles extended (mm) 1880
Drive motor capacity (kw/Hp) 0,375/0,5
Weight (kg) 49
Stair Robot - SR EXPRESS
The Stair-Robot SR Express is a battery-powered stair climber trolley device designed for day-to-day distribution. This compact and lightweight stairclimber can handle unit loads up to 150 Kg.
The drive unit can be used to easily lift or lower the SR Express with or without a load from a van or pick-up truck.
Two basic techniques are used to move a load up or down the stairway:
Step by step.
Flat on the staircase resting on two or more steps.
The SR Express is designed for a one man operation. It features several operator friendly functions and options including fast removable battery packs, remote control, different types of wheels, height adjustable platform and adjustable handles.
The SR Express has a rotating arm handle that can be fixed in any position.
Fixed in 45° for use on the staircase in flat position and folded away for use on ground level.
Stair Robot 1750 1000kg
Stair Robot - SR 1750 -1000kg
The SR 1750 HE is designed to carry unit loads weighing up to 1000 kg up- and down stairs.
The accessory equipment, stair approach ramp, manoeuvring dolly and the turntable have been designed to assist the movement up to and onto the stairs and the take off from the top and journey to the final destination.
The SR 1750 HE is equipped with a hydraulic levelling platform which makes it possible to transport fragile loads in horizontal position throughout operation.
The SR 1750 HE not only reduces the number of men required for a professional move but also greatly reduces the hazards involved in a traditional stair move.
Drive:
Driving power is provided by a minimal noise, single-phase AC motor with thermal cut-out and is transmitted to the drive-axle by a built-on worm-gearbox. The worm-wheel reduction forms an effective brake if the current is interrupted for any reason.
Hydraulic levelling platform:
The hydraulic levelling platform is operated by a single-phase, low noise AC motor with thermal cut-out. A hydraulic pump is built directly onto the motor. The lowering speed of the platform can be adjusted by the descent-adjuster.
Loading winch and Ramp:
The winch is designed to fit into the lifting platform of the SR1750. With the additional winch and ramp a load can be hand-pulled onto the SR1750 with a minimum of effort.
Control:
The robot is controlled by a low voltage (24V) manually operated 4-button switchbox connected to the stairrobot with a 2 meter remote-Control cable.
Dolly:
A heavy duty dolly is available for handling long and bulky objects. The dolly is used to transport the (loaded) SR 1750 to and on the stairs and is used at the landing.
The dolly is constructed of square steel fittings with four heavy-duty swivel wheels for easy movements. An extendable frame can be pulled out to increase stability while driving the SR 1750 on the dolly. The lead-off ramp is used to connect the dolly with the stairway.
SPECIFICATIONS
Maximum capacity (kg) 1000
Speed (mtr/min) 3
Maximum angle (deg) 45
Length (mm) 1185
Width (mm) 720
Height (mm) 320
Length with loading ramp (mm) 1180
Width with loading ramp (mm) 720
Drive motor capacity (kw/Hp) 0,75/1
Drive motor power (v) 220 or 110
Hydraulic motor capacity (kw/Hp) 0,375/0,5
Hydraulic motor
Hydraulic motor power (v) 220 or 110
Weight (kg) 175
Stairclimbing Forklift
Stairclimbing Forklift
The Stairclimbing Forklift Range can lift 540kg off the back or a truck or van, and can also carry this weight up stairs.
This range comes complete with 12 volt, 17 amp hr sealed gel battery, automatic battery charger and one 3.6 metre retractable load securing strap (RW-1). (except the QLA-HC).
There are 6 different models in this Range.
View Accessories
Features
540kg lift capacity.
Made of tempered aluminum alloy Inter-locked box frame.
12 volt permanent magnet 1/2 horsepower motor.
Manual hand crank or electric winch. Detachable fork assembly (RLA model only).
Forklifts are available with
Hand crank.
MLA and RLA models have
either a battery operated fork
the stairclimbing unit.
winch (EW), or a hand
operated fork winch (HC).
QLA models do not have the
stairclimbing unit.
Stairclimbing Handtruck
Stairclimbing Handtruck
The Stairclimbing Handtruck Range
can lift either 315kg or 540kg (depending on
the model listed below) and can climb stairs at a rate of 10 to 18 steps per minute.
The Stairclimbing Handtruck Range comes complete with 12 volt, 17 amp hr sealed gel battery, automatic battery charger and one 3.6 metre retractable load securing strap (RW-1).
The Stairclimbing Handtruck is available in 4 different models.
stairclimbing trolley
Features
315kg to 540kg lift capacity Made of tempered aluminium alloy Inter-locked box frame. View Accessories
12 volt permanent magnet 1/2 horsepower motor.
SPECIFICATIONS MS-66 MS-72 MS-1-66 MS-1-72
Capacity (kg) 315 315 540 540
Handtruck height (mm) 1680 1830 1680 1830
Handtruck width (mm) 610 610 610 610
Handtruck length (mm) 127 127 127 127
Weight (kg) 29.6 31.4 35.9 36.8
No. of straps possible 3 4 3 4
Products in This Range...
Sal Range (110kg and 170kg lift capacity)
MTK Range (190kg and 310kg lift capacity)
Heavy Duty Non-Stairclimbing Forklift (540kg lift capacity)
Heavy Duty Stairclimbing Forklift (540kg lift capacity)
Stair Robot (150kg to 1000kg lift capacity)
Steprider (800kg to 1500kg lift capacity)
Frequently Asked Questions:
How does it work?
How do you operate the machines?
Will it climb all types of steps?
How fast does it climb?
Is the step edge protected?
How long does the battery last?
Will the stairclimber climb slippery surfaces?
What other uses does it have?
How does the lift balance?
Will it damage the steps?
How do you load your truck?
What if I need parts?
NEWS
- Ikea Stores, The RTA, Sydney City Council, Brisbane Convention Centre, Sydney Adventist Hostpial, Sisters of St Josephs Aged Care Facilities, Blacktown Council Buildings, Pymble Ladies College, Redeemer Baptist School, Shell Harbour Council, National Council of Churches Facilities, Dougherty Appartments, UPA Aged Care and Uniting Care Age facilities all install Evac Chair.
- Safety and Mobility now hire out Daily Living Aids and Pressure Care Mattresses. Please contact us directly for details.
Contact Us
Please feel free to contact us personally at any time we are fully accessible to our customers and welcome your feedback.
Safety and Mobilty Pty Ltd
38 Bundabah Avenue
St Ives NSW 2075
Sydney Australia
